Posted by Glen on Sunday, October 07, 2007 at 01:19:51 :
In Reply to: Re: oil filter "plumbing" posted by Glen on Sunday, October 07, 2007 at 01:09:28 :
Oil leaves the block from the upper galley port, if you've got a "deluxe" filter the oil feeds into the bottom of the filter and exits the top side port then returns to the block at the lower port directly above the relief valve casting area. If you've got a purolator housing the oil enters it on the top side port and exits the bottom filter housing port. This drawing shows the standard equipment sealed filter.