Posted by Jerry in Idaho on Friday, September 21, 2007 at 21:26:00 :
In Reply to: Yoke Frozen To Shafts... posted by Chris on Friday, September 21, 2007 at 21:13:08 :
Pre-soaking them with PB Blaster or something similar for several days will help. You can then force them loose with a large ball peen hammer, by driving on each end of the yoke with the hammer and a big blunt chisel or drift. Make sure there aren't any set screws or bolts holding them in place. May have to use a little heat from a torch.
Follow Ups: