Posted by Todd Wilson on Thursday, September 13, 2007 at 23:36:46 :
In Reply to: removing oil pan to clean out sluge and replace front seal posted by Jesse on Thursday, September 13, 2007 at 23:08:03 :
I did this last fall on my 47 WF-32. Its a piece of cake. Pan gasket is available at a good parts store. I found about 1 inch of black muck in the bottom of my pan. I sprayed brake cleaner on the oil pick upa nd crank and tried to clean what I could off it but didnt want to disturb it too much. Use a good detergent oil and plan to change in frequently and it will clean things up. The key is to clean it slow.
Todd
Follow Ups: