Posted by Steve in Fl. on Monday, August 13, 2007 at 20:26:41 :
I am starting work on my axles on my 48FF. I have the drums loose but seems they are hung up on the heel of the pads. Is there a trick to backing off the lower anchors? Mine will not budge. Do you have to loosen up the 15/16 nut that is around the adjuster first? The cam takes a 3/8 wrench which makes it tough to get any leverage. I have the upper adjusters backed all the way off, 3/8 cap screws in the puller holes. What is the trick to the lower anchors?
Follow Ups: