Posted by Rorry on Sunday, July 01, 2007 at 22:29:55 :
In Reply to: 727 4wd and 2wd differences posted by bill on Sunday, July 01, 2007 at 22:15:34 :
Is the 74 a part-time 4x4?(divorced T-case)If its mated to the 203(full-time)the d200 727 wont work unless you pull them apart and swap tail ends.If the truck is a divorced set up,then check the d200 to see if its the short tailshaft.As long as the yoke is bolted and not a slip yoke,it will work.The 360 will work with the existing 727 behind the 318 also.I have a mated 727 that Ive been tripping over if you ever need one.It was behind a 360.I prefer 4-speeds.I am doing a 727-435 swap in our step side.Hope I helped??
Follow Ups: