Posted by Vaughn on Thursday, May 03, 2007 at 10:42:43 :
In Reply to: Cowl Vent Adjustment posted by John/Florida on Wednesday, May 02, 2007 at 15:52:42 :
The two small bolts have a larger diam. between the head and threads, if you have the right bolts. This allows the bolts to be tight and the hinge to slide properly. The bolts goes through the hinge, then the mount and washers/nut on the inside of mount. Check these to see if you have the right ones. You probably have them assembled wrong which will throw off the lid alignment and proper seating.
Follow Ups: