Posted by chriscase on Wednesday, April 04, 2007 at 22:51:26 :
In Reply to: Re: Sure, if it's not rusted solid posted by Jason in Utah on Wednesday, April 04, 2007 at 21:43:30 :
Just aim the two marks at each other. If you think you may have it wrong, try moving things one more tooth, it usually is really obvious that one tooth is waaaay of.
To test a timing chain with out disassembly, put a wrench on the crank nut, and rock the crank back and forth. You will feel the slack in the chain. One inch at the damper outside back-and-forth is about the limit.
Follow Ups: