Posted by Mark on Thursday, March 29, 2007 at 11:50:33 :
In Reply to: Vaughn-W200 drag link saga continued posted by restopaul on Monday, March 26, 2007 at 20:46:53 :
6 years ago I was able to have local napa find me 2 ends that were threaded and tapered properly and a coupler and was able to make my own. I welded it together when I got it adjusted correctly, but probably did not need to do this. It probably cost 150 bucks or so.
It is straight. But it works ok with the slight lift by re-arching springs.
If you have your old tapered ends, they can find one to match it I bet.