Posted by Adam on Thursday, March 08, 2007 at 18:45:56 :
In Reply to: Re: Can anyone tell me the length of a winch driveshaft? posted by Tim Holloway on Thursday, March 08, 2007 at 16:50:47 :
No, the 36 1/2 is for the shaft itself. The end protrudes thru the front yoke so I was able to measure it directly from that end to the end with the sliding yoke on it. I could not see the end inside the slider, but there was about 1/2 inch of visible splines before the yoke....so 36 1/2 inches would be about as long as the shaft could be... if there was 1/2 in of room inside the yoke.
Follow Ups: