Posted by Rob Steller on April 14, 2000 at 21:09:04:
Upon removing the 251 engine from my '58 W-300 I found that the front motor mount rubber block is torn. No surprize! It is a rubber block 1 1/2" x 5" x 1" thick, with 1/8" steel plates on each side. There are two 5/16" studs sticking out both sides on 4 1/2" centers. Is this the same as on other PW aplications, or is it an oddball? Any suggestions on sources for replacements, or places than can re-bond the steel side plates to new rubber? I'm in California. Thanks, as usual, to the great and wonderful wisdom of the Forum. (Sounds like the wizard of Oz) Rob