Posted by Willy-N on Saturday, January 27, 2007 at 00:13:25 :
In Reply to: Re: Oil Pump Installation, need help posted by Willy-N on Friday, January 26, 2007 at 23:46:46 :
You can also turn the rotor a little to get it to drop in. Depending on how you do it you may need to re/arange the plug wires. Myself I like it the way the book shows them so I set the dist right and work the oil pump in by turning it back or forward till it goes in right on the slot. Hard part is remembering how the slot is on the shaft and figuring out which way the cam gear will turn the pump and how much to pre turn it before pushing it in. Mark H.
Follow Ups: