Posted by daveS on Wednesday, January 17, 2007 at 20:06:16 :
In Reply to: WC-53 Carryall Wood Floor Kit posted by Dan Shockley on Monday, January 15, 2007 at 19:30:57 :
Dan,
I made the wood floor for my carryall about 5 years ago, took carefull measurements, wrote them in a notebook, and proceeded to lose the notebook. Bummer. I used an article in the MVPA Army Motors to figure out the rear floor was made from three pieces, glued together. I used the bolt holes in the cross members as a guide to build the floor.
I had three original pieces of wood from the floor, which I used to locate the seat keyholes on the driver's side. The orginal floor was tongue and groove. I had to guess on the intermediate seat frame. I did have the rear seat frame and bottom cushion to locate the rear keyholes. I will have to make another trip to the Aberdeen, MD Spring Show and see if Ernie brought his carryall to get the location of the rest of the seat keyholes.
Good luck,
Dave