Posted by Kaegi on Friday, January 05, 2007 at 15:32:27 :
In Reply to: wc transfer case posted by 55dodge230 on Friday, January 05, 2007 at 11:50:55 :
You need to use the WC63 mounting brackets, the WC63 Tcase shifting levers and rods, and if you eliminate the parking brake from the tranny and use the one on the back of the Tcse you will need the Parking brake cable from the WC63, also need the tranny to Tcase driveline and the front and rear driveline from WC63. length of rear driveline will have to be changed. no mods to floor are necessary.
You could use the WC53 drivelines but htey are not as strong as the WC63 type so it is a very good upgrade if you have access to them.
One important detail is the Parking brake cable has an anchor Ubolt over the housing that attaches to the crossmember that is inbetween the tranny and transfer case. If you have removed that cross member from your truck then you need to ptu it back in or find another way to secure the ebrake cable in that area. I have done this conversion a couple times so email me if you have anymore questions. Steve
Follow Ups: