Posted by Jonas on Thursday, December 14, 2006 at 12:17:37 :
In Reply to: Rockwell axles in '69 W500 posted by Jerry in Idaho on Thursday, December 14, 2006 at 09:56:52 :
Do you need a set of rear axles? I have a couple of Eaton rear ends out of Dodges. If the axle shafts are the same per AAA your welcome to them. Marty's got dibbs on the housing. I also have a 2 speed rear differential with 6.88:1 high gear ratio. With that you could have a 2 speed as long as you used it only in 2wd, and a super low gear if you have lockout hubs on the front as you could go to low in the transfer case, and low in the rear axle, keeping the front axle locked out.
Follow Ups: