Posted by Keith in Washington on Tuesday, December 12, 2006 at 12:05:33 :
In Reply to: Removing drums from ffpw posted by Roger in La on Monday, December 11, 2006 at 21:49:08 :
I use a impact screw driver after I have applied heat Mapp gas torch so it does not get too hot and then I put lots of penetrating oil and let it sit for awhile.
I always replace the screw and run a tap through the threads in the hub then reassemble with anti sieze. Now they come off very nicely
I have only had to drill the head off of one or 2 screws as someone buggered them badly and I could not get the impact screw driver to work. Once I did that one screw came out with my fingers and the other needed a little heat and penetrating oil. It then came out with a little help from a pair of vice grips.