Posted by Tim Holloway on Wednesday, November 08, 2006 at 9:05PM :
In Reply to: Tom Petroff posted by Kaegi on Wednesday, November 08, 2006 at 8:58PM :
Hi Steve,
The Dennan unit couples directly to the rear output of the transfer case, by means of a universal joint. It is hung directly in line with the angle of the rear output shaft. The rear driveshaft is shortened accordingly. I mounted a stout skid plate under mine, as it does hang down below the transfer case.
I will look for Dennis's phone number, in the meantime, try searching the archives for it.
Tim
Follow Ups: