Re: Help! Seized m-37 winch "free spool" handle


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]

Posted by Jim on March 10, 19100 at 10:35:33:

In Reply to: Help! Seized m-37 winch "free spool" handle posted by tom on March 08, 19100 at 22:09:56:

I disassembled the passenger side of the winch and drove the shaft out with a hammer. I made a new shaft. I think it was 3/4 inch. drilled a hole for the clutch dog and installed a new seal. The old shaft was badly corroded around the seal. The seal is a low spot and will retain water. Keep shaft greased.


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]