Posted by Steve in FL. on Sunday, October 08, 2006 at 11:51AM :
In Reply to: Leaf Spring Removal Help posted by Roger in Louisiana on Sunday, October 08, 2006 at 11:43AM :
I take it you are talking about the rear spring bolts. What I did was take a 5lb. slide hammer,ground the end of the shaft enough to get an 1/8" npt dye and cut the threads about 1 inch up the shaft. Doing what I did had all the bolts out in about 30 seconds. I could not find a piece of 1/8" npt pipe long enough where I live to make my own slide so I modified an existing slide hammer. Worked like a charm. Check the archives for other options.