Posted by Vaughn on Saturday, August 26, 2006 at 12:31PM :
In Reply to: Another Question posted by Andy on Saturday, August 26, 2006 at 6:46AM :
The PIF has the number for the pump and shut-off switch that should be added with an electric pump. Don't worry about pressure, the pumps are preset. You want to mount the pump close to the tank. I used the hacksaw trick to cut the steel line with a magnet close to the cut. I have experienced no problems with the line cutting the hose during the last 10 years. Just make sure the line and hose are in a straight line. Use NAPA fuel injection rubber fuel line, it lasts longer.