Posted by mikey stone Idaho (aka COTWM) on Saturday, August 26, 2006 at 9:31AM :
In Reply to: I added a 2-4 psi pump by the tank posted by mikey stone Idaho (aka COTWM) on Saturday, August 26, 2006 at 9:04AM :
I found a bolt on a crossmember in front of
the tank right below the bed - the fuel line
followed that to the side rail.
removed the nut - cleaned the mounting surface (need a good clean ground)
removed the fuel pickup line from the tank
mounted the pump
cut a section of the steel fuel line (length of pump & hoses) hooked back up with parts
supplied with pump (hose and clamps)
ran powerwire to switch I mounted under dash
(used existing little hole) and bing & bang
done deal
but should have had the tank done there and
then.
Follow Ups: