Posted by Vaughn on Friday, August 11, 2006 at 6:56PM :
In Reply to: wc63 distributor problems,, cap posted by 68427vette on Friday, August 11, 2006 at 4:38PM :
As Kaegi mentioned, you might have a wrong cap for the distributor. If the carbon contact will not come down with spring tension, then it is probably jammed and worn down. You could also have weak cap springs. Get the distributor # off the housing, if there is one, and compare the rotor and cap to new ones. There were 3 distributors used
AL-IAD-4201
AL-IGC-4703, 4707
Same cap and rotor used on all three