Posted by Photo Classifieds on Saturday, August 05, 2006 at 5:03PM :
Has been completely disassembled and sandblasted to bare metal followed by 3 coats of R&M black epoxy primer and linear polyurethane paint.
Modern 30 gallon fuel tank has been installed in same location as the original.
All mechanical components have been rebuilt.
There are no oil leaks that I have been able to find.
New tail pipes and mufflers.
This truck has all of our conversions installed, including.
Late '80's 318 V8 with less than 10k miles on it.
NP435 transmission with new Chelsea PTO for winch.
Four wheel power disc brakes with adjustable proportioning valve.
Firewall mounted Pedals.
Power steering
All new glass has been installed.
New white oak bed boards with 4 coats of clear polyurethane.
Has original seat with very good upholstery.
The sheet metal on this truck is in very good condition especially the bed and tailgate.
No extra gauge holes have been cut in the dash.
All original gauges work except for the gas gauge which needs to have a modern type installed.
This truck needs the following done to it.
Rear fenders are very straight but have some rust out which will need patches welded in.
The entire truck should be finish sanded and a final coat of paint applied so that everything matches.
Head liner and firewall pad need to be installed.
New tires need to be mounted.
Email me for more digital photos.
Ray Suiter rsuiter@helitool.com 541-261-9286