Posted by Paul D. Hoffmeyer on Wednesday, August 02, 2006 at 5:07PM :
In Reply to: a 315 bellhousing will not mate to a 318 posted by mclark on Monday, July 31, 2006 at 11:28PM :
Some clarification here, guys. Any Mopar V8 '61 or older with rear distributor will bolt to the 315 bellhousing. This includes the 277, 301, 318, and 326 polys. The '62 and later polys, at least the car blocks, and the LA318, 340, 360, and 273 will NOT fit. Not only are 2 bolt holes misaligned, but the dowel pins are about an inch off on each side. And the crank flange is different, as well.