Posted by Phil Street on Tuesday, July 25, 2006 at 6:31PM :
In Reply to: Re: Distance between cab and bed posted by Glen Baldwin on Tuesday, July 25, 2006 at 10:33AM :
I just updated my page at the link below. I had made a mistake in the first measurement.
Using the bed strip as a guide, the center of the bed strip hole to the inside edge of the headboard is 2 1/8". Now, the holes for the strips are not exactly centered on the crossmember and the hole (not centered either and is slightly to the rear) for the crossmember to frame bolt is offset from the strip holes by 1/4". So from the center of the frame bolt to the inside edge of the headboard is 2 3/8".
My bed is in pieces so if you need any more measurements or pics let me know.
Follow Ups: