Posted by Tim Holloway on Tuesday, July 04, 2006 at 5:46PM :
In Reply to: Re: Power steering pump pulley needed posted by Dana (in Ma) on Tuesday, July 04, 2006 at 4:26PM :
Hi Dana,
The D-500 that I removed my poly from was set up with double pulleys all around. I am still waiting for the power steering pump mounting brackets but I havent seen them. If the power steering brackets have belt tensioning capabilities then a single belt will be fine. Otherwise I will need to build a seperate tensioning device and run 2 different sized belts, tensioning from the alternator for one and either a custom tensioner or the power steering pump brackets for the second belt. A double pulley on the power steering pump would allow 2 belts the same size and tensioned by the alternator bracket. If I hadnt seen a double power steering pump pulley in the ARB literature I wouldnt be sure they existed. Even so, they may prove to be impossible to find.
Tim
Follow Ups: