Posted by Bob in MA on Saturday, March 18, 2006 at 1:52PM :
In Reply to: Re: Identify brake booster posted by Kurly on Friday, March 17, 2006 at 5:05PM :
I looked at mine today. It is slightly different than yours. From the picture that Paul posted, the top pipe on yours probably went to a remote filter. Mine has a filter attached to the casting. The brake inlet and outlet and the vacuum fitting at the bottom are just like yours. The part number on mine is 2500397. I have not yet taken it apart to rebuild. Mine was not installed properly using copper tubing for the vacuum line. It would suck the brake fluid out of the master cylinder. When I took it off, there must have been a quart of fluid in it.