Posted by chriscase@sbcglobal.com on Sunday, January 29, 2006 at 9:59AM :
In Reply to: I need .988 x .745 posted by Jonas on Sunday, January 29, 2006 at 1:17AM :
Measure the hole in your existing bushing, I'll bet a 1" bushing fits, snugly. Hammer one in, then polish the inside to fit the .745 shaft. Or pull the old bushing, anf find one with the same OD, and .750 id. Holes are bigger than shafts, by a couple thou, otherwise they seize. It's called oil clearance.