Posted by Willy-N on Monday, January 16, 2006 at 11:39AM :
In Reply to: Re: I will stick to pulling this! Picture posted by Willy-N on Monday, January 16, 2006 at 11:26AM :
Tested the Ford loader I modified for my Massey MF135 to the max with the 1,200 lb bottom to the tender tank. I had to flip it and put it back on my trailer to weld the sides on it. I built the bucket and new front section to the loader to take the weight. This sheet is 8 ft wide and 12 ft long so I had to go real high for the lift and the cylinders were at there least power range being extended all the way. Got it done but had to use a Cat Loader to get it on the truck since when done the tank weighted over 4,000 lbs! Mark H.
Follow Ups: