Posted by Tim Way on November 27, 1999 at 00:54:07:
OK I won't have time to work on my 49 until I finish landscaping our backyard, but I back it out of the garage once in a while. Last week I backed it out and noticed that the truck leans toward the drivers side. I measured from the garage floor to frame (front) and the drivers side is 1/2' lower than the passenger side. I measured the top of the axle (front) to the frame, and found the same 1/2" difference. My personal opinion is that the springs have relaxed a bit. Is there any way to check for sure if the frame is bent?
Thanks
Tim Way
Albuquerque, NM