Posted by Steve Pellock on Saturday, October 22, 2005 at 7:07PM :
The parts book describes what bolts to the left side of the clutch housing which the release fork rides on as the clutch release fork flange. There is a hole that looks like a 1/4" drive-type grease fitting should go so I put one in. Its impossible to grease the fitting and also to remove the bolt after the fitting is driven in. The lubrication section of the shop manual says the flange should be oiled. Seems like a bad spot for oil. Does anyone know if this should be lubricated at all and if so using what
Follow Ups: