Posted by Will (in MI) on Monday, August 29, 2005 at 11:45AM :
In Reply to: Will (in Mi) your front axle lift blocks posted by Brett Robb on Monday, August 29, 2005 at 0:17AM :
I'm still looking to see where I land on height direction for clearance. The 2" blocks are bolted to the spring packs, and are there to help me determining the final shape/size/etc... Based on the current measurements, I may only need a 1" lift rather than 2" that the blocks represent.
You are correct that a person shall not operate a motor vehicle having lift blocks between the front axle and springs, or with lift blocks that exceed 4 inches in height between the rear axle and springs in addition to those provided by the original manufacturer.
http://www.legislature.mi.gov/mileg.asp?page=getObject&objName=mcl-257-710c&queryid=5897132&highlight=gvwr
http://www.michigan.gov/documents/high_rise_vehicle_law_8580_7.pdf
The fine is $100 and only one citation per 24 hour period.
http://www.circuit46.org/html/fines_costs.html
How are things up in the thumb these days? Any updates on the swivel frame PW?
Thanks,
Will
Follow Ups: