Posted by Vaughn on Saturday, August 27, 2005 at 10:53PM :
In Reply to: What is the Flange Nut Socket Size? posted by Will (in MI) on Saturday, August 27, 2005 at 5:26PM :
Its a three finger puller. You can search ebay or drill and tap a bolt hole on each side of the pinion seal for 3/8 bolts, fine thread. Drill through the first seal side only. Again rig a puller using a 1/2 inch bolt (center) and 1/2 x 2 inch flat stock with two holes to match the bolt holes.