Posted by COTM Mike Stone (Idaho, USA) on Monday, August 15, 2005 at 2:47PM :
In Reply to: Re: suggestion ship hub/drum/wheel to builder posted by COTM Mike Stone (Idaho, USA) on Monday, August 15, 2005 at 1:00PM :
it you have a disc conversion should not be
a problem
but a 17inch only gives another 1/2 on the
radius and the drop center might be deeper
than that
get a drawing from them & compare if the distance from the bead to the center of the
drop is more than 1/2 might not work
Cabell's page has wheel drawings