Posted by Chris Davis - Centerville, UT on Wednesday, May 11, 2005 at 6:29PM :
In Reply to: need help!!!!!!! posted by lee in idaho on Wednesday, May 11, 2005 at 5:58PM :
I'm not certain they are the same, but on the WC-51, Timing is 1,5,3,6,2,4 - starting at the 7'oclock position on the dist.
(The timing of the dist. can be off, if 7 doestn't work, find the compression stroke on #1 cylinder and see where the rotor is pointing. On my machine is was 180 deg. off. You can simply start the 1,5,3,6,2,4 sequence from there.)
Point gap is .020 on the WC-51.
Hope that helps.
Chris Davis