Posted by Kaegi on Monday, April 11, 2005 at 0:29AM :
In Reply to: Re: Brakes (59 W300M) posted by Todd on Sunday, April 10, 2005 at 7:41PM :
Did you rebuild the master cylinder? If so, that is most likely the problem. there is a lock nut on the shaft. Loosen the lock nut, back off the adjusting part of the shaft, (the part that is going into the dust boot), just back it off 1 turn at a time, test drive it, and see if that was enough. If not back off another turn. If you have a manual it will tell you how top do this in greater detail. i don't have a manual handy.