Posted by Keith in Washington on October 05, 1999 at 07:41:08:
In Reply to: NEEDED: HOW SIMILIAR ARE PW WINCHES FROM WW2 TRUCKS WINCHES posted by DAVE on October 05, 1999 at 07:04:18:
It should work just fine. You may have to drill a hole or two in the frame to mount the bumper extensions. Both trucks should have a non-syncro NP transmissions that are the same so the PTO should work. The only proble would be if someone upgraded the PW to a NP 420 trans which requires a diffrenent PTO. Otherwise it should be bolt in job. You will have to drop the transmission to mount the PTO due to the lack of room or just swap transmissions.