Posted by Bruce on Monday, February 07, 2005 at 0:07AM :
In Reply to: Bruce, are you putting a 6B in your Carryall ? ntxt posted by Paul (in NY) on Sunday, February 06, 2005 at 10:04PM :
I am not sure what i am going to drop in my Carryall. The 6 bt is high on my list. I did some measuring today off a 6bt ( a couple of locals waved me down , so I popped the hood on one of the trucks and took out the tape measure while we were gabbing ) and then measured out the Carryalls engine bay. A 6bt would fit easily if I cut off one cylinder.
To be honest it will come down to what parts I get first. I got some axles offered to me today, dana 60 ,dana 70 but I have yet to figure out if I am going drivers or passenger side dif.
I am leaning towards the driver side because it is easier to get a reverse cut housing for that side.
Lots to learn here.
Bruce
I got the wrong size grit in my sandblaster. I gave up after plugging the nozle 20 or 30 times. that was a waste of a few hours.
Follow Ups: