Posted by Willy-N on Tuesday, February 01, 2005 at 10:19PM :
In Reply to: my next PW hauler posted by Eds on Tuesday, February 01, 2005 at 8:38PM :
Lights won't care if they are positive or negitive ground just change the bulbs to 6 volt ones. You could use a 12 volt battry for the electric brakes on the trailer if you need them. Just use a 12 volt newer electric brake control and a realy to tap off the 6 volt brake switch to send the 12 volts to the controler and isolate the controler to only be hooked up to the 12 volt battry same with the 12 volt electric brakes. I would use a volt meter to monitor the voltage in the battry since it won't be getting a charge from the truck. Re charge the battry as needed. Mark H.