Posted by Ray/Helitool on September 19, 1999 at 20:40:14:
While I had the PW apart installing the power steering. I also installed a 77 dodge boosted master cylinder. I put it under the floor just forward of the transfer case and am using a bellcrank to reverse the pedel pushrod (which is now a pullrod) direction. It works quite well, a little too well actualy, I have to reduce the sensitivity a bit. Also am going to a GMC MC and booster from the late 80s (cheaper and more common). This setup will also work on M37, but without the bellcrank since the pushrod points aft already.