Posted by mannyc on Sunday, November 21, 2004 at 12:20PM :
In Reply to: Re: Repost, power steering question posted by Jon Martin on Sunday, November 21, 2004 at 10:52AM :
tim - when i did the conversion on the wc, i had to have john bizal send me a 1/2 ton pitman arm to fit the box ray uses in the conversion. the wc 3/4 ton had a different (it was more heavy duty) spline than the ffpw. depending on your truck, you might have had a wc gear in there which would be using the 3/4 ton pitman. with the 1/2 arm, i was able to avoid cutting the large hole in the frame and i was able to use the bolts, washers and locks that ray supplied. any questions email me. its worth the effort when you get it done.
manny
Follow Ups: