Posted by Tom on August 10, 1999 at 11:53:32:
In Reply to: Wiper Motor posted by Charlie Smith on August 03, 1999 at 17:19:46:
I got my motors from VPG and made the inside
angles from bondo. I just wrapped some mixed
bondo in a plastic baggie and stuck it over the
spindle and inserted the motor. The bondo formed
a perfect fit between the motor and the inside
of the cab. Just like glass bedding a rifle. Then when you tighten the nuts on the
outside, it won't distort the cab roof. I had to
machine the angled pieces for the outside, but
it is easy. Make from aluminum bar and drill it,
and cut at an angle. Use a rubber washer.
Get the arms and blades from Vintage. Oh, yeah,
ground the motors to the windshield hinge or they
won't work since they are now insulated from the
cab with bondo and rubber!
tj