Posted by Kenneth Jackson on Wednesday, August 25, 2004 at 8:44PM :
In Reply to: VC cab question posted by Kenneth Jackson on Wednesday, August 25, 2004 at 7:48AM :
"Thanks, guys. I'll try the acid/starch method. I already wire-wheeled the
paint off both sides of the front half of the frame from the bumper to the
front cab mounts and found nothing. Jens at Vintage Power Wagons suggested
that the open-cab frames did not get a vehicle serial number applied......
I had already considered changing the cab to military by replacing the
center windshield crank with the side-mounted props, as well as adding the
passenger-side wiper (mine only has the driver's side).
Separate issue: I will be pulling the front fenders, running boards, and
grille soon. Anything special I should know about pulling the radiator?
Thanks very much!"
Follow Ups: