Posted by Steve Elliot on Tuesday, July 20, 2004 at 10:21PM :
In Reply to: Re: Cowl light info please posted by Steve Elliot on Tuesday, July 20, 2004 at 9:40PM :
Another option might be to drill a hole where the stud was into the cavity of the cowl light. Then use a bolt from the inside of the truck through the base into the cavity and put a nut on the inside. Might take two people but could be done.
I twisted off a couple of studs on my Power Wagon emblem on the side of the hood so I know how it feels. (not good)
Steve