Posted by Tim Holloway on Tuesday, July 06, 2004 at 8:27PM :
In Reply to: Snowplow Information for 48 FFPW B-1 posted by Northern Calif Dave on Tuesday, July 06, 2004 at 5:38PM :
Hi Dave,
My plow setup was taken from a 1968 Ford F-250. Frame width was correct, I had to cut a notch in the plow frame to clear the upper shock mount. Mine is an old Fisher, so I am left with the plow frame when I remove the plow. The only drawback is the crossbar that the 2 plow pivots attach to sometimes causes me to get hung up when I might not have otherwise. (Iowa rally was a case in point, gotta love that winch!) However, 2 bolts will remove the crossbar so that was my own fault.
Tim