Posted by MoparNorm on Friday, April 30, 2004 at 11:08AM :
In Reply to: Re: I'll bet they come close! posted by Marty on Thursday, April 29, 2004 at 8:38PM :
I did everything you listed except I used an Aluminum 4 bbl intake. I don't know what the torque numbers are going to be yet, but the HP should be around 330. I built it for low to mid range torque, although the remaining parts available make it hard to find a dual plane intake. A high rise spacer between the carb and manifold will help somewhat. Also headers with tube diameters no larger than 1 5/8" will help build the torque. My goal is to build max power (torque) at under 1,750 rpm running at -2 mph in low granny, low range.
MN