Posted by Vaughn on Thursday, February 26, 2004 at 11:24PM :
In Reply to: Re: tuning my flat head posted by matthew on Thursday, February 26, 2004 at 11:03PM :
If you tried adjusting the idle air screw and it has no effect, then you probably have a pluged passage. When looking down the carb there is a hole for the passage on the same side as the idle air screw - make sure it and the hole (take out the air screw)into the ventury is clean. The three hole on the linkage adjusts when and how much fuel you need. Experiment until it work right
Follow Ups: