Posted by Clint Dixon on Monday, January 26, 2004 at 6:11PM :
In Reply to: Here's A Set Of NOS Ones posted by Marty on Monday, January 26, 2004 at 2:17PM :
I can not provide any better photos than what Marty has because my mats are still screwed to the floor. That's right, each mat is actually held in place by three screws and small fender type washers. The hole shown under the part number on Marty's mat is one of the original mounting points. The corner next to the hump (to the right, just out of the picture) also was attached with a screw as well as the rear corner closest to the door. I have seen many trucks where the floor mats were long gone but a small corner fragment still remains, still firmly attached with the screw and washer to the floor.
I have a good photo of the screw placement on the driver's side on my truck, but I can not host photos. Maybe if I sent one to Marty or PhilS for everyone to see?
Clint