Posted by Fred Coldwell on Wednesday, November 12, 2003 at 11:10PM :
In Reply to: Re: BRADEN Winch Thanks All-Another Question on MU2's posted by Bob Stopka on Wednesday, November 12, 2003 at 9:43PM :
Bob: The winch used on the 1/2 ton WC is the Braden MU and on the 3/4 ton WC is the Braden MU-2. The winch gear drive case is on the same side, the driver's side, on both the 1/2 ton MU and the 3/4 ton MU2 Braden winches, so the PTO & handle is on the driver's side of the transmission in both trucks. Only the winch mounted sliding dog clutch & handle are on different sides: on the passenger side opposite the gear case for the 1/2 ton MU winch, and on the driver side next to the gear case on the 3/4 ton MU2 winch. The PW used the Braden MU2 winch from the WC 3/4 ton.
Follow Ups: