Posted by Rick on Sunday, November 09, 2003 at 5:07PM :
Just wanted to let everyone know that I was able to remove all the pistons and disassemble the engine.
My method of disassembly involved first heating the cylinders with a propane torch at the junction of the piston and the cylinder wall. I then used a long length of angle iron and drove the pistons up from the bottom. The last couple of inches I used a 3/8 rod and a block of wood on the connecting rod end.
Next step is to pack it all up and send it off to the rebuilders.
Looks like the Kroil\Coke worked.
Rick