Posted by Vaughn on Tuesday, August 12, 2003 at 9:34PM :
In Reply to: needful things posted by Roger on Tuesday, August 12, 2003 at 4:19PM :
If you’re looking for the two channel mole hair strip then you’re out of luck for the big channel unless you can find 2 inch wide mole hair tape. I used the soft Velcro tape 2 inches wide as a substitute. You will need to coat the channel with Contact Cement and be very careful when you feed in the Velcro – it's unforgiving if you don’t get things aligned right. Your local glass shop can get the smaller channel and copper split rivets can be purchased from a hardware store. The “L” shaped mole hair for the upper channel wing glass is available from VPW.
Follow Ups: